OBD2 Scanners is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Launch and Autel  are some of the best OBD2 Scan tool brands on the market. Most of the time, you will find people stuck between choosing from one brand or another. This is normal as these two brands offer similar features and excellent scanners.

At a Glance: Our Top Picks for Launch and Autel: Which is Better?
Autel MaxiDAS DS808
Launch X431
Launch X431 V Pro

Comparison Chart of the Best Launch VS Autel

Comparison of Autel and Launch

We have compared different scanners from both brands to help you make a well-informed decision.

Review of the Best Autel and Launch

1. Autel Maxidas DS808

The Autel maxidas ds808 is a high-end device built for professionals. The diagnostic scanner has a large 7-inch LCD touchscreen that displays data clearly. You don’t need any knowledge to use this user-friendly gadget. It uses cortex-A9 processor and its operating system is Android 4.4.4. In addition, this outstanding device is powered by a 3.7v lithium polymer battery and it is charged via 5 VDC power supply. It has a 32 storage memory that allows the technician to store all the data recorded. Also, the ds808 scanner is Wi-Fi enabled and allows you to update software.

The built-in camera found on the device can be used to take pictures and the storage casing is for secure keeping of the diagnostic scanner after use. This Android OS tablet has a PDF viewer, chrome, plays Utube, and its sleekness means it is easy to carry or use. Some of the different functions that it performs include read & clears codes, freeze frame data, code troubleshooters, EPB service, DPF reset, oil service reset, ABS bleeding, ECU information, reads/records/graphs live sensor data, and many more.

One of the reasons why it is loved by mechanics is because it is compatible with both OBD1 and OBD2 vehicles. It is also compatible with more than 80 US, European, and Asian vehicles.

2. Launch X431

This is another high-quality gadget from the Launch brand. Launch X431 scanner is one of the most sought-after professional diagnostic scan tools on the market. This is because it is very reliable in performance and provides very accurate results. The Launch X431 automotive scanner comes with an 8-inch screen with ppi. This is large enough for easy viewing of results and photos that were taken. It has a rear 5MP camera and front camera with 1080p HD video recording. This is a very powerful device when compared to the Autel ds808 as it has Quad-core 1.3 GHZ and Android 4.2 operating system. It comes with a 16GB memory but it can be expanded up to 32GB.

The Launch X431 automotive scan tool is powered by a 4200mAh rechargeable polymer lithium battery that as well charges via 5 VDC power supply. It is also Wi-Fi and Bluetooth enabled. The manufacturer offers 2-years free update and warranty. This scanner is compatible with more than 68 vehicle brands and 220 car models from Asia, Europe, and America. It performs both special and basic functions like reading and clearing codes, oil service reset, battery registry, ABS bleeding, DPF rest, tire pressure monitor system reset, freeze frame data, and so on.

3. Autel Maxidas DS708

The Autel Maxidas ds708 is one of the best selling Autel scanners on the market. This device has now been upgraded to ds808, which we have discussed above. The Autel ds708 is a simple and portable scanner for professionals as well as car enthusiasts. It comes with a large LCD screen for displaying results. It is compact and very easy to use or keep. The diagnostic scanner is also Wi-Fi enabled but doesn’t have Bluetooth.

It has a multilingual menu which allows the user to choose different languages of their choice. Its main function is OBD diagnosis but it also performs special functions. Autel ds708 is compatible with more than 40 vehicle makes from Asia, Europe, and America.

4. Launch X431 Pro

This is another versatile tool with lots of amazing features. It might be expensive but you will get value for your money. The Launch X431 Pro diagnostic scanner has an 8-inch LCD screen and provides the user with multiple languages. It is Wi-Fi and Bluetooth enabled which is a wonderful feature to have for easy use of the gadget. The scan tool can as well as print data and has a powerful processing system.

Its main function is full system OBDII diagnosis and it as well s performs several special functions. With coverage of more than 69 vehicle brands and 220 car models from Asia, Europe, and USA, this is a device that every professional should have.

Conclusion

Launch and Autel are two excellent scanner brands to buy from. If you are looking for a professional scanner but want something affordable, I would recommend Autel. But if you want a scanner that is very reliable and ready to spend cash to get it, then Launch is the best OBD2 scan tool to buy. For ease of use and support, Launch is more suitable than Autel. For instance, to change a language, you will need to call Autel customer care whereas in Launch you will just install software and you are ready to go. But still, both are excellent scanners and deliver accurate results.

Autel G-BOX2 is update version of Autel G-BOX which is used to do Mercedes Benz All Key Lost work with Autel MaxiIM IM608 and Autel IM508 with XP400.

Autel G-BOX2 Features:

1. Support fast mode on Vehicle and bench when all keys of Mercedes-Benz vehicles using the Das3 EIS/ EZS are lost
2. Read and write Bosch Engine ECU on F Classis of BMW and MQB of Volkswagen
3. With the Autel’s advanced Diagnostic Tablets supporting IMMO and Key programming functions

Two Method to do Mercedes-Benz All Key Lost with Autel G-Box2:

Via OBD:
This method is suitable for Mercedes-Benz W204, W207, W216 and W164 EISs after the year 2009.

On Bench:
This Method is suitable for all Mercedes-Benz EISs that are already supported by Autel Diagnostic Tablet

Autel G-BOX2 Connection:

1. Plug the G-Box2 to the Mercedes-Benz EIS using the packed DB15 Cable
2. Plug to the DC port of G-Box2 using a power adapter (DV 12V)
3. Plug the G-Box2 to the Autel Diagnostic Tablet

Here share a problem and solution about 2TB Hard Drive with all VXDIAG software cannot be installed on PC for VXDIAG VCX SE Benz DOIP.

Customer Problem:

I want to install all VXDIAG software HD on my Panasonic CF-19, but when I follow the prompt to select Mercedes-Benz operating system to start, I receive the error report “Windows failed to start. A recent hardware or software change might be the cause…” as shown in the pictures below.

Obd2tool.com engineer replied:

Please try to solve it by the following step-by-step operation.

Step 1: Press and release the power button to start the computer

Step 2: Press the blue ThinkVantage button [F12]

Step 3: Select [USB HDD] and press [Enter] button

Step 4: Select [Boot Win10x 64PE (2G above)]

Step 5: Open [BootFix] software

Select the BIOS (MBR Disk Boot Partition) and click “Yes”

Step 6: When repair successfully, it will show a success message.

If you have any VXDIAG VCX SE problem, please feel free to contact us.

Here share a problem and solution about 2TB Hard Drive with all VXDIAG software cannot be installed on PC for VXDIAG VCX SE Benz DOIP.

Customer Problem:

I want to install all VXDIAG software HD on my Panasonic CF-19, but when I follow the prompt to select Mercedes-Benz operating system to start, I receive the error report “Windows failed to start. A recent hardware or software change might be the cause…” as shown in the pictures below.

Obd2tool.com engineer replied:

Please try to solve it by the following step-by-step operation.

Step 1: Press and release the power button to start the computer

Step 2: Press the blue ThinkVantage button [F12]

Step 3: Select [USB HDD] and press [Enter] button

Step 4: Select [Boot Win10x 64PE (2G above)]

Step 5: Open [BootFix] software

Select the BIOS (MBR Disk Boot Partition) and click “Yes”

Step 6: When repair successfully, it will show a success message.

If you have any VXDIAG VCX SE problem, please feel free to contact us.

Autel G-BOX2 is update version of Autel G-BOX which is used to do Mercedes Benz All Key Lost work with Autel MaxiIM IM608 and Autel IM508 with XP400.

Autel G-BOX2 Features:

1. Support fast mode on Vehicle and bench when all keys of Mercedes-Benz vehicles using the Das3 EIS/ EZS are lost
2. Read and write Bosch Engine ECU on F Classis of BMW and MQB of Volkswagen
3. With the Autel’s advanced Diagnostic Tablets supporting IMMO and Key programming functions

Two Method to do Mercedes-Benz All Key Lost with Autel G-Box2:

Via OBD:
This method is suitable for Mercedes-Benz W204, W207, W216 and W164 EISs after the year 2009.

Here share a problem and solution about 2TB Hard Drive with all VXDIAG software cannot be installed on PC for VXDIAG VCX SE Benz DOIP.

Customer Problem:

I want to install all VXDIAG software HD on my Panasonic CF-19, but when I follow the prompt to select Mercedes-Benz operating system to start, I receive the error report “Windows failed to start. A recent hardware or software change might be the cause…” as shown in the pictures below.

Obd2tool.com engineer replied:

Please try to solve it by the following step-by-step operation.

Step 1: Press and release the power button to start the computer

Step 2: Press the blue ThinkVantage button [F12]

Step 3: Select [USB HDD] and press [Enter] button

Step 4: Select [Boot Win10x 64PE (2G above)]

Step 5: Open [BootFix] software

Select the BIOS (MBR Disk Boot Partition) and click “Yes”

Step 6: When repair successfully, it will show a success message.

If you have any VXDIAG VCX SE problem, please feel free to contact us.

http://avdicommander.com/2020/12/21/vcx-se-benz-with-all-vxdiag-software-installation-error-solution/

Here share a problem and solution about 2TB Hard Drive with all VXDIAG software cannot be installed on PC for VXDIAG VCX SE Benz DOIP.

Customer Problem:

I want to install all VXDIAG software HD on my Panasonic CF-19, but when I follow the prompt to select Mercedes-Benz operating system to start, I receive the error report “Windows failed to start. A recent hardware or software change might be the cause…” as shown in the pictures below.

Obd2tool.com engineer replied:

Please try to solve it by the following step-by-step operation.

Step 1: Press and release the power button to start the computer

Step 2: Press the blue ThinkVantage button [F12]

Step 3: Select [USB HDD] and press [Enter] button

Step 4: Select [Boot Win10x 64PE (2G above)]

Step 5: Open [BootFix] software

Select the BIOS (MBR Disk Boot Partition) and click “Yes”

Step 6: When repair successfully, it will show a success message.

If you have any VXDIAG VCX SE problem, please feel free to contact us.

http://avdicommander.com/2020/12/21/vcx-se-benz-with-all-vxdiag-software-installation-error-solution/

Here share a problem and solution about 2TB Hard Drive with all VXDIAG software cannot be installed on PC for VXDIAG VCX SE Benz DOIP.

Customer Problem:

I want to install all VXDIAG software HD on my Panasonic CF-19, but when I follow the prompt to select Mercedes-Benz operating system to start, I receive the error report “Windows failed to start. A recent hardware or software change might be the cause…” as shown in the pictures below.

Obd2tool.com engineer replied:

Please try to solve it by the following step-by-step operation.

Step 1: Press and release the power button to start the computer

Step 2: Press the blue ThinkVantage button [F12]

Step 3: Select [USB HDD] and press [Enter] button

Step 4: Select [Boot Win10x 64PE (2G above)]

Step 5: Open [BootFix] software

Select the BIOS (MBR Disk Boot Partition) and click “Yes”

Step 6: When repair successfully, it will show a success message.

If you have any VXDIAG VCX SE problem, please feel free to contact us.

http://avdicommander.com/2020/12/21/vcx-se-benz-with-all-vxdiag-software-installation-error-solution/

Some my blog read after installing ODIS Engineering software,when connect to car it prompt with ODS8001E error.But when they running ODIS diagnostic service program work fine,only ODIS-Engineering software occur ODS8001E error.So here i will show you the solution.

Related Contents:

Newest ODIS-E Engineering 12.1.1 & 9.0.4 Free Download

How to Install ODIS-Engineering 12.1.0 Diagnostic Software

Procedures:

Run ODIS service software go to “System environment” to check which PDU-API version run here,in this example it is 1.20.035

Now we need edit pdu_api-root file in the path:C:\ProgramData\D-PDU API

We need <short_NAME> EDIC_D_PDU_API_OE </SHORT_NAME>
And then we edit the paths that indicate which version to use, in my case it looks like this:

<library_FILE URI=”file:/C:/Program Files (x86)/Softing/D-PDU API/1.20.035/vecom/PDUAPI_SoftingAG_1.20.035.dll”/>

<module_DESCRIPTION_FILE URI=”file:/C:/Program Files (x86)/Softing/D-PDU API/1.20.035/vecom/MDF_SoftingAG_EDIC-PDU-API_1.20.035.xml”/>

<cable_DESCRIPTION_FILE URI=”file:/C:/Program Files (x86)/Softing/D-PDU API/1.20.035/vecom/CDF_SoftingAG_EDIC-PDU-API_1.20.035.xml”/>

In this example replace it with 1.20.035

Then go to the folder C: \ ODIS-DIAG-MODULES- ENGIN \ MCD-SERVER \ VWMCD and edit the file MCD3D_SERVER.ini
find line MCD3D_MVCI_PDU_API_Shortname and rules it in this form:
# MCD3D_MVCI_PDU_API_Shortname = “D_PDU_API_DSA”
MCD3D_MVCI_PDU_API_Shortname = “EDIC_D_PDU_API_OE”

Now start ODIS E. If it doesn’t work right away, you can manually push the process)
To do this, go to ODIS E -> Configuration -> Diagnostic interface

Click to change the VCI interface and select VAS5054

Our VAS with a serial number should appear in the list that opens, select it

Click OK

Now in the system parameters we see the PDU-API version 1.20.035

Now you can definitely work! I use projects from ODIS Service, it automatically picks up VW316C

A Volkswagen New Polo 2014 dashboard turned to system failure warning lights, system failures code “P106900 – collision cutoff has been triggered”. Here www.obd2tool.com will show you guide on how to use Launch X431 to repair/reset this trouble. And for more about Volkswagen repair,please check here:Volkswagen Trouble Repair.

What You need?
Launch X431 Device

Note:
1.Switch on the ignition;
2.Keep the battery voltage more than 12V;
3.X-431 should be performed in a good WiFi state, otherwise the diagnosis will be abnormal due to poor signal.

Operation Procedure
1.Select ShaiHai VW V21.61；
2.Select VW General System ；
3.Select system selection；
4.Select 44 Steering booster system

5.Perform [read fault code] display “P106900 – collision cutoff has been triggered”, and the next step will be carried out when the fault code cannot be cleared.

6.Security login,input password “20103”

7.Execute [system channel match], click the reset of all match values

8.Next, the reset status prompt of all the matching values is executed

9.After the success of the failure code, the power steering is restored to normal.
More test report about Launch X431 please check:Launch X431 Test report