Vxdiag Benz C6 and VCX SE Benz Xentry new software 06/2021 was released in Junee 2021.

Software including:

BENZ  2021.06, xentry 29.8.2,

DTS 8.13.029

EPC/WIS
StarFinder
SDmedia

Supports Benz from year 2004-2021

VXDIAG Benz C6 Xentry Language List:
Bulgarian, Danish, Greek, Spanish, French, Italian, Korean, Polish, Romanian, Serbo-Croatian, Swedish, Chinese, Czech, German, English, Finnish, Hungarian, Japanese, Dutch, Portuguese, Slovenian, Turkish

Update via SSD or HDD

2021.06 Xentry Software Display:

Solution to CGDI BMW “FEM BDC Version is not supported, please upgrade FEM /BDC first“. if you have the same problem, please follow this article to fix it.

Please upgrade FEM /BDC first”, please Check the BTLD version, If it is 82 or 83 , you need to go to program page .advanced mode , program it (in this article). If it is other version , you need to go to program page, program it with default version (will make a manual ).

Choose BDC_Body, then “Advanced mode”.

Follow the prompt ” The ECU is about to be programmed. Please ensure that the car battery has enough power and keep the device cable connected during the programming process. Click on “Yes” to continue.

Click on “Yes” to backup the coded data.

The progress will be displayed in the box.

Next is BMW F series programming version selection, please choose “BTLD-80”, the next one is to choose “SWFL -80”.

Then click on “Confirm”.

Retrieving and downloading the list of programming files from the server, please be patient, how much time to cost, it will depend on your internet speed.

When it shows 100%, you will be asked to enter VIN 17 characters.

Ready to program ECU…It will take about 8 minutes.

When it shows 100%, it means ECU programming successfully.

Note 1. If you have not coded after programming, please use the “BMW F/G system Coding” function to code. Some modules (such as gateways) do not require coding and you can ignore this step.

Note 2. If the airbag, sunroof and window are abnormal, please use the “ECU initialization” function to initialize.

Then check it in the Add Key page, it can work now.

CGDI BMW Key Programmer tech support: www.obd2tool.com

Launch X431 V+ HDIII adapter is used for diagnosing heavy duty trucks and performing some special functions. It improves greatly in terms of hardware configuration and optimizes the software to be more user-friendly and to cover a wide range of vehicles up to 2020 year.

Advanced hardware configuration:

Elegant tablet and more advanced HDII adapter

High-definition touch screen (1920*1200);

Smart and sensitive operating speed (with Lenovo Tablet TB-X605FC, Android 9，RAM 2G  Storage 32GB CPU Snapdragon 450 Display).

More user-friendly software:

1. Multilingual: English, German, French, Italy.
2. Enable “Camera scan (VIN)”:

With the camera, X431 V+ allows you to tap “VIN scan” -> “Camera Scan” to take photo of the VIN and automatically input it, which will be 100% correct instead of manually inputting it.

X431 V+ with add-on HDII module is compatible with newest 2021 heavy duty trucks.

You can either view on the official website (http://qcar.x431.com/newqcar/ ) or on the machine. For example, it covers Hino from 1996 -2020 year.

A wide range of Heavy Duty Trucks coverage:

Truck, bus, machinery, Engine, New Energy etc.

1. For Truck:

HD_Demo, Astra, Mercedes Benz, Credo, DAF, DFL, ERF, FAW, Ford, Foton, Freightliner, Bremach, Fuso, Ashok leyland, Hino, Hyundai, International, Iris Bus, Isuzu, Iveco, JAC, JMC, Kenworth, Mack, Man, OBD, Renault, Scania, Sinotruck, Sterling, Tata, UD, Volvo, Western STAR.

2. For Bus:

Higer, Hino, Hyundai, Irizar, Isuzu, Man, Neoplan, OBD, Renault, Setra, Sitcar, Sunlong, Sunwin, Volvo, Zhongtong.

3. For Machinery:

HD_Demo, Mercedes Benz, Caterpillar, Hino, Isuzu, OBD, Volvo.

4.  For Engine:

HD_Demo, Caterpillar, Chaochai, Cummins, Dachai , Detroit, OBD, Quanchai, Shangchai, WP, Xichai, Yangchai, Yuchai.

5. For New Energy:

HD_Demo, Chaochai, Cummins, OBD

ECU: ABS, Allison, Bosch, SCR, OBD

Program: Allison, Chaochai,Detroit, Yangchai etc.

X431 V+ with HDII module: professional diagnostic tool + special functions

It is not only a professional diagnostic tool, but also a service reset tool, how many special functions it supports, it depends the specific vehicle model.

Take Cummins for example, after entering “System Automatic”, it has options: read vehicle information, read DTC, clear fault memory, read data stream, read freeze frame, actuation test, feature and parameter, advanced ECM data.

For more other vehicle’s function list, please go to the above official sit to search.

Then go on entering “read DTC” and we will see not only DTC codes, but also the description and status. At this moment, X431 V+ plays a role of tablet, it’s really user-friendly

FreightLiner has “Special Function”, “Actuation Test” “Data Stream” options, they are all very necessary for the technicians.

The last one menu I want to emphasize is “Feedback “.

In the process of testing, if you can’t test or encounter other problems, you are allowed to submit the logs in testing to the Launch server.  Then the engineers will analyze and find out the problem to help you solve it.

Alright, the next paragraph will be on how to register Launch X431 V+:

For the first time to use the table, you are required to register a member, so that your machine will be protected by Launch and data will be safe, also enjoy the free update.

1.  Select “Login”.

2.  Select “New registration”.

3.  Inputthe user name & password,the usual email address. Select the country. Input the CAPTCHA verification code. Click on “Register”.

4.  Input the SN number insideof the envelope, and to activate the password–click ACTIVATE.

5.  Congratulations! you’ve registered successfully, you can use the machine.

6.  Diagnostic software update.

I selected all available newest truck software to update, just wait until it succeed.

How to bind X431 V+ and HDII?

Firstly, follow the above procedure to register as a car member ( open the envelope in X431 V+) .

Secondly, enter “User Info”.

Thirdly, take out the envelope in HDIII adapter, select “Activate VCI” and then follow the prompt to input serial number of activation code.

Finally, go to the car account to bind the truck module. After that, click on “Update” to update all cars and trucks brands.

Car model and year: 2018 Porsche 991.2

Purpose: activate the PCM Aux input

Porsche diagnostic scanner:

with Launch X431 proS mini

was able to activate the Aux setting without any problems.

Look at the screenshots for X431 ProS Mini activating the Aux input on PCM 4.0
First go to the system PCM/CDR. Search for “Aux”. Select Aux_IN

Change Aux_IN to “On”

I also added a Aux cable to the green connector on the back of my PCM. It connects to Pins 1 (Ground), 2 (Right) and 7 (Left).

Enjoy!

If you want to learn more about Launch X431 Scan Tools, please visit our website obd2tool.com

Launch Scan Tools (i.e Launch X431 V 8 inch, Launch X431 V+, X431 Throttle, X431 Torque, X431 Turbo, X431 PAD V) updated 2017 and later FCA Vehicles with Secure Gateway Module (SGW): Register with AutoAuth to enable your LAUNCH scan tool to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directional without using a bypass cable.

Background: Starting in 2018, FCA US has been equipped with a Security gateway firewall that is new to the car industry. The logic behind this Gateway is to secure the vehicle’s control systems against security threats and other issues as car ecosystems become more connected and advanced. To access this Gateway your scan tool will need to be authorized by Auto Auth. There are a few steps that you will need to complete in order to gain authorization to the FCA US Gateway.

Instruction:

Step 1. sign up for a user account on autoauth.com.

If you’re an independent or mobile technician that does not work for a shop, you will be able to register your own shop once you log into your account.

Step 2.Register your Launch X-431 scan tool serial number

You will need to register your scan tool serial number.

Once you sign up with your user account, inform your shop management of your username, so they can add your profile to the shop account.

Requirements:

Please make sure you have a stable Internet connection and have updated your launch scan tool with the latest software and firmware update. As not doing this delays the diagnostic process and can prevent you from accessing the gateway.

Performs diagnostics and bi-directional without using a bypass cable:

Establish a connection with your Launch scan tool to the vehicle via auto VIN detect or the manual Chrysler configuration.

Tap any Special functions, the FCA will prompt you to log in to access the security gateway.

User authentication will be valid as long as the vehicle is keyed on an engine off and your VC I is connected to the vehicle with a stable Internet connection.

VIN Registration is an operation to registering VIN in ECM (Engine Control Module). It must be performed each time ECM is replaced. NOTE: Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M). For example, Nissan X-Trail T32 2017 ECM VIN registration can be done by any Launch X431 including Launch X431 V, X431 V+, PAD V etc.

Procedure: I.E X431 PAD V Nissan X-Trail T32 2017 ECM VIN registration

Hook X431 Pad V up to Nissan X-Trail T32 2017, select “Diagnosis” and then Nissan, then “Full system diagnosis”.

Select “The vehicle with 16PIN”.

System selection.

Engine.

ECM  (Engine Control Module).

Communicating… till 100%

Special function.

Select “Vin registration”.

Turn ignition on and engine stopped.

Select “VIN Read” and click on “Read”.

Input VIN, refer to S /M for location of identification plate.

Command succeed. Turn ignition off for 10 seconds and then turn on to confirm no DTC.

Double check:

Back to ECM (Engine Control Module) -> Vin registration.

You can see on X431 PAD V VIN Value, that means the VIN Number is already registered successfully.

Job is done.

Please keep in mind, if you have any of X431 V, X431 V+ etc, you can also perform VIN registration.

Enjoy!

If you want to know more about launch x431 scanner, please click launch x431 test .

If you want to know more about nissan trouble solved, please click Nissan Trouble Repair .

این مقاله به شما نشان می دهد چگونه نمادهای وسیله نقلیه را در  Autel Maxisys Elite و سایر Autel تغییر دهید.

https://www.youtube.com/watch؟v=rr3tAc28QNs

اگر می خواهید بیشتر با اسکنر Autel آشنا شوید ، لطفا از وب سایت ما دیدن کنید: www.obd2tool.com

Error description: Installed Consult-III Plus V75 software on win7, got error ” CONSULT-III plus software is not supported by this computer. Check the computer and install CONSULT-III plus software on a suitable computer. Touch ‘OK * to finish the installation.” I also installed on Win 10 Pro, Win 7 Enterprise, Win Xp Sp2 etc, I got the same error message.

Engineer replied:

You have to put the following file into the software before installing consult-iii plus v75

https://mega.nz/#!RVxWkSDb!XbsvWRI90YScFLdq3AZUGJHDhu5Iq_rvpJ9VE-rHfFM

Simple steps:

1.Open “tempNissan” -> “C3P_V75.15.00”

2.Copy “Setup.inx” on the desktop, paste it into “C3P_V75.15.00” to replace the original one.

This instruction show you guide on how to use Volvo PTT to diagnose engine performance for Volvo FM440 truck.

Preparations:

Volvo PTT Premium Tech Tool Free Download

Diagnose Volvo FM440 Truck Engine Performance by Volvo PTT:

Connect Volvo PTT interface (VOCOM recommend) to FM440 truck DLC and then run Volvo PTT

After then select “Test”–>”28-Ignition and control system”–>”Sensor Values,Monitoring”

After then click “Start” button

The operation exists in several variants.

Select the variant that corresponds to the connected vehicle/machine.

Here select “D13A” and click “OK”

The purpose of this test is to check that the sensors give plausible values.Evaluation of the sensor value is best done on an engine at normal working temperature,at low idle with the vehicle stationary.The test can also be used to check the sensor values under other conditions.

When it access this window,click “Play” button and check the conditions requested.

After then the screen will display the value of the sensors on the Engine.

Here are “Fuel Supply Pressure”,”Boost Pressure”,”Intake Manifold Temperature”….and others

For maximum results,this check must be carried out at the engine working temperature and engine position when low idle

So the purpose of “Sensor Values Monitoring…” is to check or evaluate the values displayed by the sensor.

For “Crankcase Pressure Sensor”,the maximum normal value is 1KPa

For the alarm limit,which is 8 kPa.

This post will show you how to do OBD2 odometer adjustment for Toyota all key lost with Xtool X100 Pad3.

Preparation:
KC100
Key smart card
XTOOL X100 PAD3

Steps:

1. Connect OBD port to XTOOL X100 PAD3.
2. Click “START TO ACTIVATE”.

3. Enter the names of company and mailbox, click “OK”.
4. Select “Update”>>“Update all”.

5. When the update is successful, return to the main page, select “Diagnosis”>>“Odometer adjustment”, then we can see that Odometer adjustment function supports a variety of models.

6. Select “America”>>“OBDⅡ”>>“AUTO SCAN”>>“Live Data”.

7. Click “Select all” and choose “OK” to overview live data.